|
1. Nail feeder box sides together, driving the nails through the long sides into shorter
sides. Use four nails as shown on the drawing.
|
|
2. Center bottom panel over bird feeder box and nail in place, using six nails as shown. Further
building steps below.
|
|
3. Turn the feeder box over, position the roof support in the center of the box, pointed side
up. Drive nails through box sides into the roof support - use two nails on each side.
|
|
4. Nail the two roof panels to the roof support.
|
|
5. Nail the top panel on to the roof. Screw eye hooks into the top panel 1 ¼ inch from each
end.
|
|
6. The wooden bird feeder is now complete. You may now paint the feeder if desired.
|
As you can see, the bird feeder kits are simple to build and will give the kids a great little wood
project to take home and use. And they will learn about nature as they watch and learn to
identify the birds which use the finished feeder or bird house.
